329 Less than 4 inch in diameter.. Tubing or hose, flexible metal, Anchor or stud link chain: 2 inches or more in diameter. Not less than 3/4 inch in diameter. Less than 3% and not less than 516 Less than 516 inch in diameter. transmission of power: Of not more than 2-inch pitch and 34 cent per lb. 11⁄2 cents per lb. 7% cents per lb.. 34 cent per lb. 20 per cent.19 20 per cent.10 2% cents per lb.... 7% cents per lb.. 20 per cent.20 All other chains used for the trans- 35 per cent.. 35 per cent 22 25 per cent.23 1 cent per lb. 15 per cent. 15 per cent.... 330 331 thereof. Bolts, with or without threads or Nuts, nut blanks, and washers, of Spiral nut locks, and lock washers, Cut nails and cut spikes, of iron or Hobnails, of iron and steel, not ex- Nails, spikes, tacks, brads, and sta- smaller than 65000 inch in di-10 cent per lb... 10 cent per lb.... 19 Lap-welded, butt-welded, seamed, or jointed iron or steel tubes, pipes, flues, or stays. 20 Chain or chains of all kinds, made of iron or steel, n. s. p. f. 21 Provided, That all articles manufactured wholly or in chief value of chain shall not be subject to a lower rate of duty than that imposed upon the chain of which it is made, or of which chain is the component material of chief value. (Acts of 1922 and 1930.) 22 Sprocket and machine chains of iron and steel, and parts thereof. (Act of 1922.) 23 Sprocket and machine chains. (Act of 1913.) 24 "Of wrought iron or steel" not in act of 1913. 25 "Exceeding 2 inches in length" added in acts of 1922 and 1930. 26 "Not exceeding 2 inches in length" added in acts of 1922 and 1930. 27 Wire nails and staples. 28 Tacks and brads of iron or steel wire dutiable as manufactures of wire. 20 Spikes of iron and steel only. 30 Iron and steel nails. 338 Screws, commonly called wood screws, of iron or steel. 35 per cent. 25 per cent.. 25 per cent.. 25 per cent. 339 Table, household, kitchen, and Composed of iron or steel and Composed wholly or in chief Plated with platinum. Plated with gold.. Plated with silver. Any of the foregoing containing 30 Iron and steel nails. 31 Tacks, n. s. p. f. 40 per cent. 82 Articles or wares n. s. p. f., if composed wholly or in chief value of metal. 33 Staples, made of iron or steel wire, inch in diameter. 34 Wire staples. 50 per cent.39 50 per cent.89 * * less than 1 inch in length and smaller than 654000 of 1 35 That can be used as abrasives. (Act of 1913.) 36 "Whether plain or covered with cotton, silk, or other material" added in acts of 1922 and 1930. 37 In acts of 1922 and 1930 "household utensils" and "flat ware" were added and words limiting the provision to "similar hollow ware" removed. 38 Articles or wares, n. s. p. f., of base metal, not plated with gold or silver. 39 Articles or wares, n. s. p. f., composed wholly or in part of platinum, gold or silver, and articles or wares plated with gold or silver. 40 The foregoing rates shall apply to the foregoing articles whether or not containing electrical heating elements as constituent parts thereof. (Act of 1930.) Mill saws. Pit and drag saws.. Steel band saws, finished or further 341 Lithographic plates of stone or other 342 343 Plates of iron or steel engraved or Needles: Crochet. For embroidery machines of every For knitting and sewing ma- For shoe machines. Latch...... Spring-beard.. Tape, knitting, and all other, n. s. p. f., and bodkins of metal. 344 Cylindrical steel rolls ground and polished, valued at 25 cents per pound or over. Any of the foregoing containing "9 41 All other saws, n. s. p. f. Rates of duty Act of 1930 Act of 1922 Act of 1913 20 per cent. 20 per cent. 12 per cent. 20 per cent. 20 per cent. 12 per cent. 20 per cent. 20 per cent.. 12 per cent. 42 Steel engraved forms for bonds, debentures, stock certificates, negotiable receipts, notes and other securities; and engraved steel plates, certificates or other securities, free. suitable for use in engraving or printing bonds, stock 43"Or otherwise prepared" added in acts of 1922 and 1930. "No articles other than the needles which are specifically named in this section shall be dutiable as needles unless having an eye and fitted and used for carrying a thread. (Act of 1913.) 45 Or crochet "hooks," act of 1930. 46 All other needles, n. s. p. f. 47 Needles for knitting machines. 48 Articles or wares n. s. p. f., if composed wholly or in chief value of iron, steel, lead, copper, brass, nickel, pewter, zinc, aluminum, or other metal, but not plated with gold or silver, and whether partly or wholly manufactured. 19 New classification made by act of 1930. 345 346 347 Saddlery and harness hardware: 50 Not plated with gold or silver. els, and all other articles of Valued at not more than 20 Valued at more than 20 and not more than 50 cents per 100. | and not more than $1.663% Shoe or slipper and parts thereof- cents per 100. more than 50 cents per 100. Trouser and waistcoat and parts Valued at not more than 20 Valued at more than 20 and not more than 50 cents per 100. thereof, by whatever name Not mounted on tape.. 15 per cent.56 20 per cent 57 15 per cent.56 2 20 per cent.57 48 Articles or wares n. s. p. f., if composed wholly or in chief value of iron, steel, lead, copper, brass, nickel, pewter, zinc, aluminum, or other metal, but not plated with gold or silver, and whether partly or wholly manufactured. 50 This classification made in acts of 1922 and 1930. 61 Articles or wares n. s. p. f., * * plated with gold or silver. 52"Or other base metal" added in acts of 1922 and 1930. 53 "And not more than $1.663" added in act of 1930. 54 "Whether loose, carded, or otherwise, including weight of cards, cartons, and immediate wrappings and label" not in act of 1913. 55 "All the foregoing valued at not more than $1.662% per hundred" added in act of 1930. 56 Made wholly or in chief value of iron or steel. 57 Composed of metal other than iron or steel. 350 Pins, not plated with gold or silver, Brass, copper, iron, steel, or other 351 Pens, n. s. p. f.: Of plain or carbon steel... Wholly or in part of other metal.. With nib and barrel in one piece. 352 Twist and other drills, reamers, milling cutters, taps, dies, die heads, and metal-cutting tools of all descriptions, and cutting edges or parts for use in such tools, composed of steel, or substitutes for steel, suitable for use in cutting metal, n. s. p. f.62 Cutting tools of any kind containing more than 10 per cent of vanadium, or more than 10 per cent of tungsten, molybdenum, or chromium.62 45 per cent..--- 34 cent per line per 2 cent per line 12 cent per line 14 cent per line per 45 per cent... 34 cent per line per 2 cent per line 2 cent per line 14 cent per line per 15 per cent. 15 per cent. 15 per cent. 15 per cent. 15 per cent. Electrical telegraph (including 35 per cent 64. Telephone, wiring and therapeu- 35 per cent 6+ Signaling and welding apparatus, 35 per cent 64. vices and articles. 58 Line measure being 140 of 1 inch. 59 Pins inade of wire dutiable at 15 per cent. 60 Pens, metallic, n. s. p. f. 61 Articles or wares n. s. p. f., composed wholly or in chief value of iron, steel, or other metal. 62 New classification made by act of 1930, which provides also that "The foregoing rates shall apply whether or not the articles are imported separately or as parts of or attached to machines, but shall not apply to holding or operating devices." 63 Containing more than 10 per cent tungsten or molybdenum. 64 All the foregoing, and parts thereof, finished or unfinished, wholly or in chief value of metal, and n. s. p. f. 65 Machines or parts, n. s. p.f. |