Year-bookThe Society, 1913 |
Edisi yang lain - Lihat semua
Istilah dan frasa umum
accordance with Section ADOPTED AUGUST 25 afford the inspector American Locomotive Company AMERICAN SOCIETY annealed ASSOCIATION FOR TESTING axles bend cold bend test specimens Cambria Steel Company carbon Carnegie Steel Company castings cent Chairman Check Analyses chemical composition COMMITTEE concern the manufacture drop test ductility elastic limit electric resistivity elongation extensometer facilities to satisfy facturer following requirements forgings free from injurious furnished in accordance gage length heat INSPECTION AND REJECTION inspector representing INTERNATIONAL ASSOCIATION Manganese manufacturer's Number of Tests open-hearth process PERMISSIBLE VARIATIONS Phosphorus plates prior to shipment PROPERTIES AND TESTS rails reasonable facilities Rehearing representing the purchaser requirements specified rolled SOCIETY FOR TESTING specific gravity specified in Section splice bars STANDARD SPECIFICATIONS steel shall conform Structural Steel Sulphur temperature Tensile strength Tension and bend tension test specimen test ingot taken test pieces TESTING MATERIALS PHILADELPHIA U. S. A. AFFILIATED Unless otherwise specified wheels wire yield point
Bagian yang populer
Halaman 160 - The inspector representing the purchaser shall have free entry, at all times while work on the contract of the purchaser is being performed, to all parts of the manufacturer's works which concern the manufacture of the material ordered. The manufacturer shall afford the inspector, free of cost, all reasonable facilities to satisfy him that the material is being furnished in accordance with these specifications.
Halaman 101 - Samples tested in accordance with sec. 5, which represent rejected material, shall be preserved for two weeks from the date of the test report. In case of dissatisfaction with the results of the tests, the manufacturer may make claim for a rehearing within that time.
Halaman 297 - ... red or black, and is so fixed by growth or position that it will retain its place in the piece.
Halaman 273 - ... and, in smoothing off, the trowel should be drawn over the mold in such a manner as to exert a moderate pressure on the excess material. The mold should be turned over and the operation repeated.
Halaman 269 - Method. — As a method to be followed for the analysis of cement, that proposed by the Committee on Uniformity in the Analysis of Materials for the...
Halaman 127 - ... works which concern the manufacture of the castings ordered. The manufacturer shall afford the inspector, free of cost, all reasonable facilities to satisfy him that the castings are being furnished in accordance with these specifications. All tests (except check analyses) and inspection shall be made at the place of manufacture prior to shipment, unless otherwise specified, and shall be so conducted as not to interfere unnecessarily with the operation of the works.
Halaman 40 - ... one tension and one bend test shall be made from both the thickest and the thinnest material rolled. b. If any test specimen shows defective machining or develops flaws, it may be discarded and another specimen substituted. c.
Halaman 142 - An analysis to determine the percentages of carbon, manganese, phosphorus, and sulphur shall be made by the manufacturer from a test ingot taken during the pouring of each melt, a copy of which shall be given to the purchaser or his representative. This analysis shall conform to the requirements specified in Section 6.
Halaman 333 - Specimens 6. (a) Tension test specimens shall be of the form and dimensions shown in Fig. 1.
Halaman 141 - ... works which concern the manufacture of the material ordered. The manufacturer shall afford the inspector, free of cost, all reasonable facilities to satisfy him that the material is being furnished in accordance with these specifications. All tests (except check analyses) and inspection shall be made at the place of manufacture prior to shipment, unless otherwise specified, and shall be so conducted as not to interfere unnecessarily with the operation of the works.