Gambar halaman
PDF
ePub
[blocks in formation]

311 No article not specially provided

for which is wholly or partly
manufactured from tip plate,
terneplate, or sheet, plate, hoop,
band, or scroll iron or steel, or of
which such tin plate, terneplate,
sheet, plate, hoop, hand, or scroll
iron or steel shall be the material
of chief value, shall be subject
to 68 a lower rate of duty than
that imposed on the tin plate,
terneplate, or sheet, plate, hoop,
band, or scroll iron or steel from
which it is made, or of which it
shall be the component thereof
of chief value. (Acts of 1913,

1922, and 1930.)
312 Beams, girders, joists, angles, char

nels, car-truck channels, tees,
columns and posts, or parts or
sections of columns and posts,
and deck and bulb beams, to-
gether with all other structural
shapes of iron or steel:
Not assembled, manufactured or 46 cent per lb...--- 46 cent per lb. 10 per cent.

advanced beyond hammering,

rolling or casting.
Machined, drilled, punched, as- 20 per cent.. 20 per cent.

10 per cent.
sembled, fitted, fabricated for
use, or otherwise advanced be-
yond hammering, rolling, or

casting.
Sashes and frames of iron or steel. 25 per cent. 25 per cent.. 10 per cent.
Sheet piling..

44 cent per lb. Y cent per lb.69 10 per cent.80 313 Hoop, band, and scroll iron or steel,

n. s. p. f., valued at 3 cents per
pound or less, 8 inches or less in

width: 70
Thinner than 38 and not thinner 25,00 cent per lb... 25100 cent per lb..

than 10 inch.
Thinner than 10% 000 and not 35100 cent per lb.- 35/100 cent per lb.-$10 per cent. 71

thinner than 381000 inch.
Thinner than 384000 inch.

55100 cent per lb.- 55100 cent per lb.. Bands and strips of iron or steel,

whether in long or short

lengths, n. s. p.f.-
Bands..

25 per cent.
25 per cent

10 per cent.71 Strips..

25 per cent.
25 per cent.

12 per cent.72 314 Hoop or band iron, and hoop or 44 cent per lb. 44 cent per lb.

band steel, cut to lengths, or
wholly or partly manufactured
into hoops or ties, coated or not
coated with paint or any other
preparation, with or without
buckles or fastenings, for baling

cotton or any other commodity.
68“Pay" changed to “be subject to” in act of 1930.
69 Structural shapes, acts of 1913 and 1922.

70 Provided, That barrel hoops of iron or steel, and hoop or band iron, or hoop or band steel, dared, splayed, or punched, with or without buckles or fastenings, shall pay no more duty than that imposed on the hoop or band iron or steel from which they are made. (Acts of 1930 and 1922.) 71 Hoop,

band, or scroll iron or steel not otherwise provided for in this section, and barrel hoops of iron or steel, wholly or partly manufactured.

73 Śtrips of iron or steel, n. s. p. f.

Free.

[blocks in formation]

315 Rivet, screw, fence, and other iron

or steel wire rods, whether
round,73 oval, or square, or in
any other shape, nail rods and
flat rods up to 6 inches in width
ready to be drawn or rolled into
wire or strips, all the foregoing

in coils or otherwise:
Valued at not over 4 cents per 310 cent per lb.---- 310 cent per lb...

pound.
Valued at over 4 cents per pound. %0 cent per lb. 910 cent per lb.- Free. 74
Iron or steel wire rods which have 14 cent per lb. ad- 14 cent per lb. ad- 15 per cent.75

been tempered or treated in any ditional to rates ditional to rates 10 per cent.
manner or partly manufactured. otherwise pro-

otherwise pro

vided thereon. vided thereon.
Iron or steel bars and rods of what- | 18 cent per lb. ad- 18 cent per lb, ad- 10 per cent.

ever shape, or section which are ditional to rates ditional to rates
cold rolled, cold drawn, cold ham. provided on bars provided on bars
mered, or polished in any way in or rods of what- or rods of what-
addition to the ordinary process ever section or ever section or
of hot rolling or hammering.

shape which are shape which are
hot rolled.

hot rolled.
Strips, plates, or sheets of iron or 340 cent per lb. ad- | 310 cent per lb. ad-

steel of whatever shape, other ditional to rates ditional to rates
than polished, planished, or provided on provided on
glanced sheet iron or sheet steel, plates, strips, or plates, strips, or
which are cold hammered, blued, sheets of iron or sheets of iron or 15 per cent.78
brightened, tempered, or polished steel of common steel of common

(12 per cent.77
by any process to such perfected or black finish or black finish
surface finish or polish better than of corresponding of corresponding
the grade of cold rolled, smoothed thickness or thickness or
only.

value.

value. 316(a) Round iron and steel wire:

Valued not above 6 cents per

pound-
Not smaller than 95/1000 inch in 34 cent per lb... 34 cent per lb. 15 per cent.

diameter.
Smaller than 95/1000 and not 144 cents per lb--- 124 cents per lb..-- 15 per cent.

smaller than 65/1000 inch in

diameter.
Smaller than 651000 inch in 144 cents per lb... 142 cents per lb... 15 per cent.

diameter.
Valued above 6 cents per pound.-- 25 per cent.

25 per cent.

15 per cent. Wire composed of iron, steel, or 25 per cent.

25 per cent.

15 per cent.78 other metal, n. s. p. f. (except gold, silver, platinum, io tung

sten, or molybdenum.80
Flat wires and all steel in strips 25 per cent.. 25 per cent. 15 per cent 81 or 12
not thicker than Y4 inch and not

per cent.82
exceeding 16 inches in width,
whether in long or short lengths,
in coils or otherwise, and wheth-
er rolled or drawn through dies

or rolls, or otherwise produced.
Wire of iron, steel, or other metal 83 310 cent per lb. ad- 310 cent per lb. ad- 15 per cent.

coated by dipping, galvanizing, ditional to rate ditional to rate
sherardizing, electrolytic, or imposed on wire imposed on wire
any other process with zinc, tin, of which made. of which made.

or other metal. 78 Provided, That all round iron or steel rods smaller than 29100 inch in diameter shall be classified and dutiable as wire.

74 Horseshoe nail rods free in act of 1913.
75
rolled wire rods in coils or bars not smaller than 29100 inch in diameter

when made by the crucible, electric, or cementation process

and finished by rolling, hammering, or otherwise.

76 Strips not thicker than No. 15 wire gauge nor wider than 5 inches; and sheets. 77 Plates and strips, n. s. p. f. 78 Wire, n. s. p. f. 79 “Except gold, silver, or platinum” added in acts of 1922 and 1930. 80 “Tungsten or molybdenum" added in act of 1930. 81 Steel in strips not thicker than No. 15 wire gauge and not exceeding 5 inches in width. (Act of 1913.) & Strips of iron or steel, n. s. p. f. (Act of 1913.) 85 “Other metal'' added in acts of 1922 and 1930.

[ocr errors]
[blocks in formation]
[ocr errors]

316(a) Telegraph, telephone, and other 35 per cent.. 35 per cent.... 15 per cent.

wires and cables composed of
iron, steel, or other metal (except
gold, silver, platinum,84 tung.
sten, or molybdenum,60) covered
with or composed in part of cot-
ton, jute, silk, enamel, lacquer,
rubber, paper, compound, or
other material, with or without

metal covering. 85
Wire rope.-

35 per cent.. 35 per cent... 30 per cent.
Wire strand 87

35 per cent.
35 per cent.

(30 per cent. 86

115 per cent.88 Spinning and twisting ring trav- 35 per cent.

35 per cent.

20 per cent.89
elers. 90
Wire heddles and healds..

25 cents per 1,000 25 cents per 1,000 25 per cent.

and 30 per cent. and 30 per cent. 316(b) | Tungsten (containing more than 50

per cent of tungsten, tungsten
carbide, or combinations there-

of):
Ingots, shot, or bars, n. s. p. f., or 50 per cent... 60 cents per lb.91 15 per cent 92 93 or 10
scrap.

and 25 per cent.

per cent.94
Wire.

60 per cent.
25 per cent 95

15 per cent.95
Sheet, or other forms, n. S. p. f.-- 60 per cent.. 40 per cent 96

20 per cent.96
Molybdenum (containing more

than 50 per cent of molybde-
num, molybdenum carbide, or

combinations thereof):
Ingots, shot, or bars, n. s. p. f., or 50 per cent. 50 cents per lb.91 15 percent 09, 93 or 10
scrap.

and 15 per cent.

per cent.94
Wire-

60 per cent.
25 per cent 95

15 per cent.95
Sheet, or other forms, n. s. p. f. 60 per cent.

40 per cent 46

20 per cent. 98
Tungsten and molybdenum (con-

taining more than 50 per cent of
tungsten, tungsten carbide, mo-
lybdenum, molybdenum car-

bide, or combinations thereof):
Ingots, shot, or bars, n. s. p. f., or
scrap--
50 per cent. (07).

Commodities non

existent in 1913. Wire.

60 per cent.

25 per cent 95 15 per cent.96 Sheet or other forms, n. s. p. f. 60 per cent.

40 per cent 96 20 per cent.08 317 Galvanized wire fencing composed 12 cent per lb. 22 cent per lb. Free.

of wires not larger than 29100 and
not smaller than 8100 inch in

diameter.
Galvanized wire n. S. p. f., not 12 cent per lb. 22 cent per lb..

Free.
larger than 20100 and not smaller
than 800 inch in diameter, of
the kind commonly used for

fencing purposes.
Wire commonly used for baling 22 cent per lb...... 12 cent per lb.

Free.
hay or other commodities.
80 "Tungsten or molybdenum" added in 1930.
84 “Platinum” added in acts of 1922 and 1930.
85 Composed of metal and rubber, or of metal, rubber, and other materials. (Act of 1913.)
86 Wire rope.
87 Wire strand" added in acts of 1922 and 1930.
88 Articles manufactured wholly or in chief value of any wire or wires provided for in this section.
89 Articles or wares, n. s. p. f., composed wholly or in cheif value of metal.
80 “Spinning and twisting ring travelers " added in acts of 1922 and 1930.
01 Duty on content of metal named.
92 Molybdenum, tungsten, or alloys used in the manufacture of steel, n. s. p. f.
93 Chemical compounds or mixtures, n. s. p. I.
94 Metals unwrought, n. s. p. 1.
95 Wire, n. s. p. f.
96 Articles or wares, n. s. p. f., of metal, not plated or in chief value of platinum, gold, or silver.
9 At rates for tungsten or molybdenum metal, whichever predominates.

[blocks in formation]

318 Woven-wire cloth: Gauze, fabric,

or screen, made of wire com-
posed of steel, brass, copper,
bronze, or any other metal or
alloy, n. s. p. f.:
With meshes not finer than 30 25 per cent.

25 per cent.
wires to the lineal inch in warp

or filling
With meshes finer than 30 and 40 per cent.. 35 per cent..
not finer than 90 wires to the

15 per cent.
lineal inch in warp or filling.

120 per cent. With meshes finer than 90 wires 50 per cent... 45 per cent..

to the lineal inch in warp or

filling.
Fourdrinier wires and cylinder 50 per cent.

30 per cent 1
wires, suitable for use in paper-
making machines (whether or
not parts of or fitted or at-
tached to such machines), and
woven-wire cloth suitable for
use in the manufacture of
Fourdrinier wires or cylinder

wires.
319(a) Forgings of iron or steel, or of com. 25 per cent... 25 per cent.. 12 per cent.

bined iron and steel, not machined,
tooled, or otherwise advanced in
condition by any process or oper-
ation subsequent to the forging

process, n. s. p. f.
Iron or steel anchors and parts 25 per cent.. 25 per cent. 12 per cent.

thereof.
319(b) Autoclaves, catalyst chambers or 35 per cent.

25 per cent ? 20 per cent.
tubes, converters, reaction cham-
bers, scrubbers, separators, shells,
stills, ovens, soakers, penstock
pipes, cylinders, containers,
drums, and vessels, any of the
foregoing composed wholly or in
chief value of iron or steel, by
whatever process made (except
by casting), wholly or partly
manufactured, if over 20 inches
at the largest inside diameter
(exclusive of non-metallic lining)
and having metal walls 144 inches
or more in thickness, and parts

for any of the foregoing.
320 Electric storage batteries and parts 40 per cent.

40 per cent.

)
thereof, storage battery plates,
and storage battery plate ma-
terial, wholly or partly manu-

factured, all the foregoing n. s. p.f.
321 Antifriction balls and rollers, metal 10 cents per lb. and 10 cents per lb. and 35 per cent.
balls and rollers commonly used 45 per cent.

45 per cent.
in ball or roller bearings, metal
ball or roller bearings, and parts
thereof, whether finished or un-
finished, for whatever use in-

tended. 5
322 Rail braces, and all other railway Kio cent per lb... Yo cent per lb...-- Free.

bars made of iron or steel, and
railway bars made in part of steel,
T rails, and punched iron or steel

flat rails.
Railway fishplates or splice bars, 44 cent per lb. 14 cent per lb.. 10 per cent.

and tie plates, made of iron or

steel. 98 Articles manufactured wholly or in chief value of any wire or wires provided for in this section. 99 Articles or wares n. s. p. f., if composed wholly or in chief value of metal. 1 If parts of machines; otherwise dutiable as woven wire cloth.

2 Cylindrical tubular tanks or vessels; also might be classified as parts of machines at 30 per cent, or as manufactures of metal n. s. p. f. at 40 per cent.

3 Manufactures of metal n. s. p. f.
• According to component material of chief value.

5"Antifriction balls, ball bearings, and roller bearings, of iron or steel or other metal, finished or unfinished, and parts thereof" in act of 1913.

6 Rail braces added in acts of 1922 and 1930 (classified as manufactures of metal n. s. p. f. at 20 per cent in act of 1913.)

7 Tie plates added in acts of 1922 and 1930 (classified as manufactures of metal n. s. p. f. at 20 per cent in act of 1913.)

120352-30 4

(6).

[blocks in formation]

323 Axles 8 and parts thereof, axle bars, 610 cent per lb..... 610 cent per lb----- 10 per cent.

axle blanks, and forgings for axles,
of iron or steel, without reference
to the stage or state of manufac-
ture, n. s. p. f., valued at not more

than 6 cents per pound.
324 Wheels for railway purposes, and 1 cent per lb..-..-- 1 cent per lb.. 20 per cent.

parts thereof, of iron or steel, and
steel-tired wheels for railway pur-
poses, wholly or partly finished,
and iron or steel locomotive, car,
or other railway tires and parts
thereof, wholly or partly manu-

factured,
325 Anvils of iron or steel, or of iron and 3 cents per lb... 158 cepts per lb.--- 15 per cent.

steel combined, by whatever
process made, or in whatever

stage of manufacture.
Jewelers' and other anvils weighing 45 per cent.

45 per cent.----- 15 per cent.
less than 5 pounds each.10
326 Blacksmiths' hammers, tongs, and 138 cents per lb... 138 cents per lb.... 10 per cent.

sledges, track tools, wedges, and

crowbars, of iron or steel.
327 Cast hollow ware, coated, glazed, 20 per cent.. 20 per cent.

10 per cent.
or tinned, but not including
enameled ware and hollow ware
containing electrical elements.11
Cast-iron andirons, plates, stove 20 per cent.. 20 per cent.. 10 per cent.

plates, sadirons, tailors' irons,
hatters' irons, but not including
electric irons,i2 and castings and

vessels wholly of cast iron.
Cast-iron pipe of every description, 25 per cent.

20 per cent.

10 per cent.
and cast-iron fittings for cast-iron

pipe.13
Castings of iron or cast-iron plates 20 per cent.

20 per cent.. 10 per cent.
which have been chiseled, drilled,
machined, or otherwise advanced
in condition by processes or oper-
ations subsequent to the casting
process but not made up into
articles, or parts thereof,

finished machine parts. 14
Castings of malleable iron n. s. p. f... 20 per cent.

20 per cent.

10 per cent. Molders' patterns, of whatever ma- 50 per cent.

40 per cent 15 or 20 per cent 15 or 15 terial composed, for the manu

3343 per cent.16 facture of castings. 328 Furnaces, tubes, and flues, welded 25 per cent

25 per cent.

20 per cent.
cylindrical, made from plate
metal, whether corrugated, rib-
bed, or otherwise reinforced
against collapsing pressure.
Tanks or vessels, cylindrical and 25 per cent

25 per cent

20 per cent.
tubular, for holding gas, liquids,
or other material, whether full or

empty.
Tubes, iron or steel, finished or 25 per cent.

25 per cent

20 per cent.
unfinished, 17 n. s. p. f.
Tubes or pipes, rigid, of iron or 30 per cent.

30 per cent.

20 per cent. 18
steel, prepared and lined or
coated in any manner suitable
for use as conduits for electrical

conductors. 8 Provided, That when iron or steel axles are imported fitted in wheels, or parts of wheels, of iron or steel, they shall be dutiable at the same rate as the wheels in which they are fitted.

9 Provided, That when wheels for railway purposes, or parts thereof, of iron or steel, are imported with iron or steel axles fitted in them, the wheels and axles together shall be dutiable at the same rate as is provided for the wheels when imported separately.

10 This classification added in acts of 1922 and 1930.

11 “But not including enameled ware and hollow ware containing electrical elements" added in acts of 1922 and 1930.

12 “But not including electric irons” added in acts of 1922 and 1930. 13 “Cast-iron fittings for cast-iron pipe" added in act of 1930; fittings might also have been classified as manufactures of metal, n. s. p. f." under the acts of 1913 and 1922. 14 “Or parts thereof” added in acts of 1922 and 1930. 15 Manufactures of metal, n. s. p. f. 16 Manufactures of wood, n. s. p. f. 17 “Unfinished" added in acts of 1922 and 1930. .18 All other iron or steel tubes, finished, n. s. p. f.

or

per cent.16

« SebelumnyaLanjutkan »