Place the oil cup back in the bath and measure into it a 50 cc charge of fresh oil. Destroy any bubbles on the surface of the oil, put on the cover with its thermometer, put in the heating lamp, record the temperature of the oil, and proceed to repeat... Fuel Oil in Industry - Halaman 34oleh Stephen Osgood Andros - 1920 - 270 halamanTampilan utuh - Tentang buku ini
| United States. Bureau of Mines - 1927 - 158 halaman
...water bath to the required point. (d ) Place the oil cup back in the bath and measure into it a 50cc charge of fresh oiL Destroy any bubbles on the surface...with its thermometer, put in the heating lamp, record the temperature of the oil. and proceed to repeat the test as described above in sections 4 to 6. inclusive.... | |
| John Rome Battle - 1920 - 1280 halaman
...uniform amount will be required to reduce the temperature of the water bath to the required point. 27. Place the oil cup back in the bath and measure into...with its thermometer, put in the heating lamp, record temperature of oil and water, and proceed to repeat test as described above, in Sections 8 to 22 inclusive.... | |
| Alfred Holmes White - 1920 - 348 halaman
...water bath to the required point. (d) Place the oil cup back in the bath and measure into it a 50-cc charge of fresh oil. Destroy any bubbles on the surface...with its thermometer, put in the heating lamp, record the temperature of the oil, and proceed to repeat the test as described above in Sections 4 to 6, inclusive.... | |
| Alfred Holmes White - 1920 - 348 halaman
...uniform amount will be required to reduce the temperature of the water bath to the required point. (d) Place the oil cup back in the bath and measure into it a 50-cc charge of fresh oil. Destroy any bubbles on the surface of the oil, put on the cover with its... | |
| David Talbot Day - 1922 - 990 halaman
...uniform amount will be required to reduce the temperature of the water-bath to the required point. (d) Place the oil cup back in the bath and measure into...with its thermometer, put in the heating lamp, record the temperature of the oil, and proceed to repeat the test as described above in Sections 4 to 6, inclusive.... | |
| David Talbot Day - 1922 - 1000 halaman
...the oil shall be at least 20° F. (11° C.) below its probable flash point when testing is started. Destroy any bubbles on the surface of the oil. Put on the cover, with flash-point thermometer in place and gas tube attached. Light the pilot light on the cover and adjust... | |
| Robert Mason Wilhelm - 1923 - 120 halaman
...reduce the temperature of the water bath H to the required point. Place the oil cup F back in the bath H and measure into it a 50 cc. charge of fresh oil....bubbles on the surface of the oil, put on the cover E with its thermometer, put in the heating lamp K, record temperature of the oil and water, and proceed... | |
| George G. Oberfell, R. C. Alden - 1924 - 568 halaman
...lowered to 15° F. (8° C.) below the flash point of the oil, as shown by the previous test.f (rf) Place the oil cup back in the bath and measure into...with its thermometer, put in the heating lamp, record the temperature of the oil, and proceed to repeat the test as described above in sections 4 to 6, inclusive.... | |
| United States. National Bureau of Standards - 1929 - 1868 halaman
...uniform amount will be required to reduce the temperature of the water bath to the required point. (d) Place the oil cup back in the bath and measure into it a 50 ml charge of fresh oil. Destroy any bubbles on the surface of the oil, put on the cover with its thermometer,... | |
| 1930 - 722 halaman
...uniform amount will be required to reduce the temperature of the water bath to the required point. (d) Place the oil cup back in the bath and measure into it a 50-cc charge of fresh oil. Destroy any bubbles on the surface of the oil, put on the cover with its... | |
| |