 ... of the steam. This arrangement tends to wire-draw the steam and increase its velocity at the point of contact with the oil, giving a better atomizing effect. A permanent adjustment of the plate can be made for each burner after the requirements of...  Liquid Fuel and Its Combustion - Halaman 167oleh William Henry Booth - 1903 - 410 halamanTampilan utuh - Tentang buku ini
 | Marshall Monroe Kirkman - 1904 - 100 halaman
...wide aperture for the exit of the steam. This arrangement tends to wire-draw the steam and increase its velocity at the point of contact with the oil,...of service are ascertained. The moving of the plate would not then be required except for cleaning purposes. The oil, as it passes through the burner,... | |
 | Anglo-Mexican Petroleum Products Co - 1914 - 176 halaman
...plate, thus giving a thin, wide aperture. This arrangement tends to wire-draw the steam and increase its velocity at the point of contact with the oil,...after the requirements of service are ascertained. The burner is made of brass, as an iron casting is found to be sufficiently porous to enable the steam... | |
 | Charles McShane - 1920 - 912 halaman
...plate, thus giving a thin, wide aperture. This arrangement tends to wire-draw the steam and increase its velocity at the point of contact with the oil, giving a better atomizing. A permanent adjustment of the plate can be made for each burner, after the requirements of service... | |
 | 1912 - 916 halaman
...steam, atomized and conveyed into the firebox. Fig. 2 of the steam. This arrangement tends to wire-draw the steam and increases its velocity at the point...of service are ascertained. The moving of the plate would not then be required except for cleaning purposes. The oil, as it passes through the burner,... | |
| |
